ورق نانازبست شرکت کلینگKLINGERSIL C-4430 Non Asbestos Gasket Jointing Sheetsر �

High pressure gasket for universal applications. Suitable for use with water and steam at higher temperatures as well as to oils, gases, salt solutions, fuels, alcohols, moderate organic and inorganic acids, hydrocarbons, lubricants and refrigerants. Premium material grade with outstanding stress retention. Dimensions of the standard sheetsSizes: 1000 mm x 1500 mm, 2000 mm x 1500 mm.Thicknesses: 0.5 mm, 1.0 mm, 1.5 mm, 2.0 mm, 3.0 mm;other thicknesses and sizes on request.Tolerances: thickness ± 10%, length ± 50 mm, width ± 50 mm. SurfacesKLINGERSIL® gasket materials are generally furnished with surfaces of low adhesion. On request, graphite facings and other surface finishes on one or both sides are also available. Function and durabilityThe performance and service life of KLINGER gaskets depend in large measure on proper storage and fitting, factors beyond the manufactor’s control. We can, however, vouch for the excellent quality of our products. With this in mind, please also observe our installation instructions. Tests and approvalsFire safe according to BS 5146. BAM approval in accordance with UVV 28, oxygen( VGB 62) tested up to 100 bar and 85°C. Approved for gas supply in accordance with DIN 3535/6. DIN - DVGW permit NG 5123AN0418. SVGW permit, KTW recommended. Lab. National d`Essais 9030144. WRc approval. Germanischer Lloyd. Meets the technical requirements of BS 7531:2006 Grade AX. TA Luft (Clean air) approval, tested in accordance with VDI 2440 at 250°C.